Paper Jam Error:
Paper Jam is a typical issue with every one of the printers. It happens because of utilization of torn paper bits, wrong paper plate chose, wrong paper compose chose and so forth. The answers to such issues are to check the paper plate has the correct kind of paper or not, likewise, watch that the roller is fixed or not.
Toner does not fix the page:
Here and there the Fuser needs a cleanup and for that need to open the front entryway of the printer, check for the blue shading box and after that takes the toner cartridge out and now takes the blue brush out and clean the get together in light of the fact that it is accessible at the highest point of dark toner cartridge port.
Windows chooses a default printer:
Tap on the beginning catch at that point move to Devices and Printers. Presently, Printer and Faxes rundown will appear and from that point make a right-click from the coveted printer and tap the set as default printer. Finally, if incited then affirm the activity and exit from Devices and Printers and restart the PC and printer.
Sluggish Spooler issue:
Initially, influence a correct tap on the Start to catch and move to "Run" choice. And afterward, need to type 'services.msc' (without cites) in the run discourse box and hit Enter. Presently, you will be incited to Services window and from that point scan for Print Spooler influence a tick on it and select to restart choice.
Shown 50.4 error messages:
The 50.4 mistake message is demonstrated when the power rope of printer is connected to an electrical extension or the UPS and to close it have to connect the printer straightforwardly to an electrical plug.
Printouts are light and spotty:
This mistake happens if the ink cartridge is become scarce or stopped up and to settle this issue the Users are expected to evacuate the ink\toner cartridge and dunk the delicate material into either boiling water or liquor. At that point, rub the delicate fabric warily at the print head and the spout of the printer. At that point put the ink cartridge back in its place.
Error message 69.x:
To comprehend this issue Users are just expected to control off your printer and sit tight for 10-15 seconds and afterward control it on. In the event that the issue still holds on then need to control off both printer and PC and afterward turn them on.
Error message 10
It demonstrates the issue with Supplies Memory Error. This mistake has different motivations to happen. To investigate this issue control off the printer and furthermore need to unplug it from the electrical plug. Sit tight for quite a while and plug the printer back. After this, connect the printer back to the electrical plug, control it on.
Shrink content issue on a sheet:
To settle this issue right off the bat go to Control Panel choice and hit the Printer Properties tab. At that point change the printer settings for each sheet and hit the OK catch.
Wireless printer issues:
Users can confront ease back printing issues and watch that the remote printer works speed Users can utilize a special divert number in the switch.
For more beneficial info about our services please contact us through our toll-free HP Printer Support Phone Number +1-800-379-6509 and get instant solution.
Really appreciate with the information shared by the Joe Watson. HP Printer Support is really helpful. I am using HP Printer from the last 3 years and many times there are lots of technical issues that unable to fix by my own. But when I saw this blog, I call HP Printer Support toll-free number +1-800-379-6509 and the experts team fix my issue. Thanks for your support.
ReplyDeleteNice Post!!
ReplyDeleteFrom troubleshooting to optimizing all your HP related concerns are addressed here at HP Support Services 855-676-7123 center.
HP Support Number
HP Customer Care
HP Technical Support
HP Printer Support
HP Laptop Support